Sub-Audio Weird (2024)

1. Why Does the Subwoofer "Sound Bad"? - SynAudCon

16 dec 2011 · 1. Poor subwoofer design/quality · 2. Defective subwoofer · 3. Poor room acoustics · 4. Incorrect signal processing · 5. Poor microphone technique ...
Why Does the Subwoofer "Sound Bad"? Pat Brown lists eleven possible reasons why the subwoofer is not producing good sound.

20 apr 2019 · If there is no signal going to the sub then the woofer won't move. If the noise only happens when the woofer is moved by the input signal it's ...
So when I turn on my subwoofer it’s from episode the only identifier I found was (es-sub-ele10-200) and play anything with bass especially at low volume it sounds like it scraping and it makes a whole lot of extremly weird noises and makes a huge amount of resistance on the cone yet as soon as...

1 okt 2023 · Could be different positioning in the room causing slightly different room modes, could be harmonic distortion, could be port noise.
I am sure that this has been discussed before in ASR, but I did a search and could not find it. Mods please feel free to merge the thread if this topic has come up before. Basically I have noticed that even if two subs (say) with a 10" driver and an 18" driver produce 40Hz at 80dB, the bigger...
See Also
What is Renters Insurance & How Does it Work?What Does Renters Insurance Not Cover Who Needs Renters Insurance?6 Good Reasons to Get Renter's Insurance

10 mrt 2024 · I play a 40hz pure sine wave through my Sonos sub at night to mask infrasound that I can hear. It works well when the audio file plays properly. However, it ...
Hi,I was wondering if anyone can help. I play a 40hz pure sine wave through my Sonos sub at night to mask infrasound that I can hear. It works well when the audio file plays properly. However, it has started to 'pulse' for some reason. I also get a message flashing up on the screen of my phone sayin...

4 aug 2022 · In adition, there's room acoustic problems. That's why we have more speakers being put in more places other than just in one place, in order to ...
Hello there. I am a user of a 12" EDGE SPL122-e6 sub powered by a Crown XLS 2502 amp on bridge mode. The way I have them set up is this: -low-pass filter up to 80Hz -signal coming from a digital equalizer, some frequencies are lowered, some are boosted (very important! ex: 32Hz -5dB bc. of...

23 aug 2007 · its either clipping or the sub is bottoming out, either way its caused by having your gain to high, set your gain using an o-scope or dmm.
See Also
Is Renters Insurance Worth It? (2024)
Silver Member

13 okt 2022 · I've played music, movies, tv shows and to my hears, I couldn't hear any differences, the sub at 0 is almost not audible, at 5 you can hear something.
So, the long awaited sub arrived yesterday, and I've immediately set it up in my living room (which I believe falls into the Sonos definition of small-medium size) and paired it with Arc and One's as Surround and so far is one of the biggest disappointments I ever had from a piece of tech.I've playe...

4 feb 2008 · It sounds as if someone was pushing down on a foot pump or squeezing a fireplace breather at the same speed the sub is moving. I was playing the ...
New member

Too much power or distortion damages subwoofers · Slam: The incoming signal tells the cone to move too far forward · Bang: The signal tells the coil to move too ...
Too much power or distortion damages subwoofers

10 jun 2020 · Disconnect the subwoofer. Remove the screws holding the plate amp. Check the connections (wires) from the plate amp to the woofer driver making sure they are ...
the sound doesn't come from the woofer. 10 days ago this happend for the first time (those strange sounds, 3 times or so), then my fuse blew. got new fuses and the problem persists. after the video i got it to play one time for a minute or so (everything seamed ok), once it auto shut off (after...